KMV-MC100-011 / KMV-MC100-012

YAMAHA ZSR 8mm Electric Feeder (Part No.: KMV-MC100-011 / KMV-MC100-012 Product Introduction The ZSR is an upgraded new electric feeder of Yamaha ZS series with 8mm size. It is fully driven by electric motors without air cylinders and features faster feeding response. Developed exclusively for YAMAHA high-speed placement machines, it optimizes motor acceleration and reduces start-stop delay compared with the old ZS feeder, suitable for high-speed mounting of small resistors and capacitors such as 0201 and 0402 components. Common part numbers in the market: KMV-MC100-011 (8×2), KMV-MC100-012 (8×4). Many merchants mark it abbreviated as MV-MC100-01100, which is actually the same ZSR 8mm feeder. Compatible Models Yamaha high-speed placement machines including YSM10, YSM20, YSM20R, YSM40, YSM40R, YRM10, YRM20R • Specification: 8mm (two versions: 8×2mm / 8×4mm) • Drive: Built-in servo motor, electric feeding + electric tape peeling • Theoretical feeding speed: Up to 0.06s per component, a notable speed increase compared with ZS (0.1s per component) • Applicable materials: Tape-mounted resistors and capacitors, small SMT ICs, tiny 0201/0402 components • Weight: Approximately 2.5KG • Type: Brand new original ZSR electric feeder Product Advantages